Farpoint Dovetail Radius Block - Meade 8 Inch SCT

SKU: FDM8R
Farpoint Dovetail Radius Block - Meade 7 Inch SCT (6795754537113)
FDM7R_2 (6795754537113)

Farpoint Dovetail Radius Block - Meade 8 Inch SCT

SKU: FDM8R
Regular price $55.00 Sale price $41.25 Save $13.75
/
  • Secure payments
  • In stock, ready to ship
  • Inventory on the way
Shipping calculated at checkout.

Customer Reviews

Based on 6 reviews
17%
(1)
33%
(2)
17%
(1)
0%
(0)
33%
(2)
D
D. Schmitt
Farpoint Dovetail Radius Block - Meade 8 Inch SCT?

While these look nice and appear to be of high quality, I had to drill out both outer mounting holes on both blocks to allow the mounting screws to align with the holes on the OTA. I have a deforked 8 inch LX200 GPS. Maybe my OTA is an oddity, I don't know. I only needed the radius blocks for the top of my OTA, because I'm fabricating my own mounting plate for my imaging PC & accessories, which is why I ordered these. The radius blocks/dovetail combo I purchased for the bottom of the OTA fit very well, but did not have an option for radius blocks only. I would not recommend these radius blocks unless you are ok with the potential of having to drill them to make them work.

B
Bruce Veatch
They aren't even compatible with Meade 8" SCT as advertised

When they didn't fit, I contacted customer service and they said they knew about the issue with some Meades. They send their fix which was two Celestron radius blocks that didn't work either. Don't believe what they say...cost me $20 to find out they are selling radius blocks that don't fit all Meade 8" SCT. Charged me restocking fee and return shipping. Buyer Beware of these folks!

C
Conrad Ealie
FarpointAstro Radius blocks for Meade 8 inch SCT

I purchased these blocks so I could mount my 8 inch Meade SCT classic (deforked) to a Skywatcher EQR-6 pro. The radius of the blocks were a good match to the radius of the Meade. However, the screw holes on the radius blocks didn’t align with screws holes on the Meade. Using the left screw hole on the block, the right screw was hole about half a screw width off (to wide). There is a center screw hole in the blocks, and using that screw hole with either a left or right screw hole made a solid attachment to the Meade. With the blocks secured to the Meade, I attached my 14 inch Losmandy D plate to the blocks with no problems. From there, to the EQR-6 and everything works fine. I’m happy with the radius blocks, I’d purchased them again from FarpointAstro. A final cosmetic point about the blocks is the company name, FarpointAstro, is upside down.

G
Guerino Sacripante

Farpoint Dovetail Radius Block - Meade 8 Inch SCT

D
Dale Powell
Didn't quite fit - had to enlarge the holes

I have a Meade LX200GPS from 2002. It must be a little odd sized. In 2006 I bought a Losmandy dovetail with radius blocks. That set included two different blocks. One that fit perfectly and one that only used the center hole. I was hoping the Farpoint blocks would be identical to the longer and perfect Losmandy. Turned out the Farpoints are the same height, but the hole spacing for attachment to the Meade tube is a little short. I made one work easily by slightly enlarging the holes.

Sometimes manufacturer's vary their specs just a bit from run to run. We are aware of a spec variation on this particular scope from Meade. We are glad you were able to make our Dovetail work even though the holes did not match up perfectly. But, if this ever happens to you again on another item (or ... someone reading this is having the same problem), be sure to contact our support team (support@opticalstructures.com) and we can send you a modified version of the part that is having a fit issue.

Farpoint Dovetail Radius Block - Meade 8 Inch SCT are for use with existing dovetails. If you already own a dovetail and you want to move it to another scope; all you need is the proper sized radius blocks for the new scope.

Farpoint Dovetail Radius Block - Meade 8 Inch SCT


Farpoint Dovetail Radius Block - Meade 8 Inch SCT are for use with existing dovetails. If you already own a dovetail and you want to move it to another scope; all you need is the proper sized radius blocks for the new scope.

These dovetail radius blocks are compatible with Meade 8" SCT only. Use with the telescope's existing dovetail bars.

See the Farpoint Radius Block-Dovetail Telescope Compatibility Chart for more information.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Recently viewed