JMI 5 Inch Large Wheels for Wheeley Bars
Upgrade your JMI medium wheeley bar system with fully-locking JMI polyurethane 5 Inch Large Wheels – Universal Style Wheeley Bars.
- Reviews (0)
- What's in the box?
- What Size Wheels Should I Purchase?
- What Leveling Screws do I need?
JMI 5 Inch Large Wheels – Universal Style Wheeley Bars
Upgrade your JMI medium wheeley bar system with smooth rolling JMI 5 Inch Large Wheels – Universal Style Wheeley Bars. Includes three fully locking 5″ diameter polyurethane wheels. With these wheels, the Wheeley Bars will raise the mount 6-3/8″ off the ground.
Only logged in customers who have purchased this product may leave a review.
- Three 5″ Polyurethane Wheels and hardware
What Size Wheels Should I Purchase?
The small 2-3/8″ hard-rubber wheels are good for flat hard surfaces with no cracks or grooves.
For hard surfaces, such as concrete sidewalks, with seams or cracks, the 5″ polyurethane wheels are best.
The large 10″ all-terrain pneumatic rubber-tire wheels are designed for field use on rough surfaces such as grass, dirt and gravel. However, great care must be taken in maneuvering on these surfaces, particularly when wet, because the wheels may sink below the surface.
We do not recommend using Wheeley Bars on these surfaces under adverse conditions, especially if you have a very heavy telescope.
Medium Wheeley bars need 1/2″
Medium Heavy Duty or Large ones will be 5/8″
New Style Wheeley Bars have the leveling screw going through the aluminum block leg.
Old style Wheeley Bars have a nut welded on the end of the legs and if you have this style you’ll have to measure the screw you have. Then you can decide which screw you need.