JMI HEAVY-DUTY Medium Size Universal Wheeley Bar
Get an alert when the product is in stock:
Already 1 persons shown interest.
All Medium Heavy Duty Wheeley Bars fit tripod tip-to-tip distance of 34 – 42.5 inches.
Tip receptacle is 2-3/4″ I.D. Will not fit tripods with feet larger than 2-3/4 inches.
The 2 3/8″ wheels and 1/2″ leveling screws are no longer available on the Medium Heavy Duty Wheeley Bars. The Standard Package now comes with 5″ Wheels and the Heavy Duty 5/8″ Leveling Screws.
Additional Options, such as the 10″ pneumatic wheels and tow handle, can be configured below at a package discount.
- Reviews (2)
- What's in the box?
- Product Specifications
- What is Tip-to-Tip Distance?
- Doorway Measurements
- Selecting the Right Wheeley Bars
- What Size Wheels Should I Purchase?
- Customer Comments
JMI HEAVY-DUTY Medium Size Universal Wheeley Bar
JMI HEAVY-DUTY Medium Size Universal Wheeley Bar creates an easy way to move mounted telescopes to and from observing locations. Consists of a sturdy base with locking wheels and leveling bolts. Comes standard with Heavy Duty 5/8″ Leveling Screws. Easily move, lock and level the complete telescope assembly from location to location without the need to disconnect and reconnect all the electrical and computer cabling during transport.
This HEAVY-DUTY Version is designed for heavier equipment with the same footprint as the standard Medium Wheeley Bars and the heavier construction of the Large Wheeley Bars. In other words, they are like Large Size Wheeley Bars with short legs (the same length as the Medium Size Wheeley Bars). Because of the increased weight with the narrow width, there will be a greater risk due to the high center of gravity. The equipment will need to be strapped down to the Wheeley Bars, and, as with all Wheeley Bars, JMI will not be responsible for equipment tipping over.
If you have any issues or questions while ordering, please email: [email protected]om
Only logged in customers who have purchased this product may leave a review.
- Heavy-Duty Medium Size Universal Wheeley Bar
Maximum Load: 300 lbs
Adjusts to fit tripods with tip-to-tip distance from 34″ to 42.5″
See doorway measurements for more dimensions.
Tip receptacle is 2-3/4″ I.D. Will not fit tripods with feet larger than 2-3/4 inches
What is Tip-to-Tip Distance?
To be sure that your tripod or pier will fit a particular Wheeley Bar product, it may be necessary to verify the tip-to-tip distance of the mount. Usually, this measurement is made with the legs of a tripod fully retracted (the shortest length) and spread out completely. Alternately, you can measure at your preferred viewing height, but be sure to allow for the height of the Wheeley Bars (listed with each product). The tip-to-tip distance is the measurement from the outside edge of the end of a tripod leg or pier foot (where it touches the ground) to the outside edge of another tripod leg or pier foot as illustrated below.
Here are some examples of different types of tripods and piers and where to measure.
We often get questions regarding the width of our Wheeley Bars to determine if they will fit through a particular doorway. The following information should help in making that determination. The following dimensions do not apply to Wheeley Bars that have been upgraded with 10″ large wheels. For Universal Wheeley Bars with the 10″ Large Wheel Upgrade the doorway width must be three (3) inches wider than the tip-to-tip distance.
There are three basic measurements as noted above. The maximum width (X) is measured in a similar fashion as the tip-to-tip distance except that the measurement is made to the outside corner of the legs or leveling screws (typically about 3″ wider than the tip-to-tip measurement of a pointed tip tripod mount). The minimum measurement (N) is from the end of one leg to the inside measurement on the opposite side. This would help in determining the narrowest door that the Wheeley Bars could possibly be maneuvered through. A third measurement (W) is in between the other two and gives the width as measured from the end of one leg to the outside measurement of the opposite side. The diagrams below illustrate the three measurements.
The illustration on the left shows the Universal Wheeley Bars turned so they can be pushed through the doorway based on the NORMAL width (W) without having to do any special maneuvering. The second illustration shows the Universal Wheeley Bars being maneuvered by twisting them through the doorway based on the absolute MINIMUM dimension (N). The third illustration shows the Wheeley Bars being blocked from moving though a doorway because they are positioned such that the MAXIMUM profile (X) is being presented.
Universal Wheeley Bars are called Universal because they are made to be adjustable to handle various sizes of mounts. This means that the measurement we have been talking about can vary depending on the in-out adjustment of the Wheeley Bar legs. The table below shows the minimum and maximum for the different widths indicated by the variable W, N and X.
|Width Dimensions for Universal Wheeley Bars|
Selecting the Right Wheeley Bars
When deciding which Wheeley Bar model to purchase, there are several things to consider. These include:
- Type of equipment you will be transporting
- Tip-to-tip distance of the tripod feet
- Total weight of the equipment to be transported
- Type of surface you will be moving the equipment over
TYPE OF EQUIPMENT
Dobsonian telescopes should use one of our Dob-style Wheeley Bars based on which Dob you have. Telescopes with a tripod should use one of the Universal-style Wheeley Bars. The size will depend on the size and weight of the telescope equipment (see below).
The Universal-style Wheeley Bars show a minimum and maximum tip-to-tip distance for the tripod legs. The best way to measure the tip-to-tip distance is to set your telescope up the way you would normally use it then measure the distance between two tripod feet. Be sure to account for the height the Wheeley Bars will lift your equipment off of the ground. Compare that measurement with the range shown for each size of Universal Wheeley Bars to match up with the best fit. Custom Wheeley Bars are available for those that fall outside of all of the listed ranges. For more information on how to make this measurement, see What is Tip-to-Tip Distance?
If you wish to move your telescope equipment through a doorway, see Doorway Measurements to verify whether you will be able to maneuver your equipment through a particular doorway (based on the size of the Universal Wheeley Bars).
The Medium Size Universal Wheeley Bars are for small, lighter telescopes like a standard C8 that weighs less than 100 pounds. If you have a telescope with tip-to-tip distance that falls into the Medium range but weighs near or over 100 pounds (total weight of all equipment) you should use the HEAVY DUTY Medium Wheeley Bars since they will support the weight much better. If you are planning on adding any equipment to your telescope in the future (like cameras, guide scopes, etc.) you should take that weight into consideration. Heavy Duty Medium, Large and Custom Wheeley Bars can carry up to 300 pounds. We also carry Extra Large and Max Wheeley Bars for specific very large telescopes.
If you need to move over concrete with cracks or seams (like sidewalks and driveways) or rough cobblestone-like surfaces, you can get the standard 5″ Wheels as these will ride over these surfaces without getting stuck. If moving over grass, dirt or gravel (or you just want a smoother ride) you should use the 10″ Pneumatic Wheels. These wheels will travel over surfaces smoothly and not sink into cracks. There are times when the 5″ wheels can be used on hard dirt, but if the weight of the telescope is more than 100 pounds, the 5″ wheels may dig into the upper layer of dirt and become hard to move. For more information on the composition of the different wheels, see What Size Wheels Should I Purchase?
What Size Wheels Should I Purchase?
For hard surfaces, such as concrete sidewalks, with seams or cracks, the 5″ polyurethane wheels are best.
The large 10″ all-terrain pneumatic rubber-tire wheels are designed for field use on rough surfaces such as grass, dirt and gravel. However, great care must be taken in maneuvering on these surfaces, particularly when wet, because the wheels may sink below the surface.
We do not recommend using Wheeley Bars on these surfaces under adverse conditions, especially if you have a very heavy telescope.
“Your dolly’s fit the need perfectly. Good workmanship. My iOptron mounts love theses (as well as my back).” (R. R. 08/03/2017)
“The Wheeley Bars with the large 5/8″ screws along with the heavier mount made all the difference. My scope setup is now solid as a rock. Thank you so much for helping me with the advice. I never would have believed the mount and screws would have made that much difference but it does. Thanks for making a superior mobile setup. It is well worth the money!” (F. G. 07/2017)
“…BTW, my wife and I love and appreciate JMI products (especially the Wheeley Bars—makes it easier for my wife to move her 10-inch dobbie!” (M. H. 03/2017)
“…thanks so much for your voice mail, conversation and amazing customer service. If you guys ever need a comment, endorsement, etc., please contact me. (J. H. 03/2017)
“…that is more than fair and very much appreciated. I guess that thoughtfulness is why JMI products and support are so widely respected.” (H. C. 03/03/2017)
“I am absolutely delighted with the Wheeley Bars as it makes movement of the telescope around the yard very easy. For a telescope of this size I would not be able to use it to full advantage without the ability to move it easily both for observation and storage. Thanks for a great product well worth it’s price. The quality of construction immediately made an impression while I was assembling it for use.” (P. R. 06/2014)
“Got the Wheeley Bars! Fantastic high-quality product. Machine work on every part is perfect and there wasn’t a single part which I wasn’t impressed with the sturdiness of. Great product!!!! Thanks.” (J. Z. 05/2014)
“My order for the Heavy Duty Medium Universal Wheeley Bars arrived today and I had to write regarding it because so much about the entire order impressed me. Let me begin with the packaging itself. I have not seen an order in many years that was so well packaged…. But the packaging was not the only thing which I was impressed by. The design and workmanshipo is top notch…. (R. A. 09/2012)
“Just received your large Wheeley Bars and they are exceptionally robust, well-engineered and beautifully made! They are exactly what I need to get more observing time and less set-up time.” (S. S.)
“I received my Wheeley Bars as ordered, thanks. I just have to say that this has been the best accessory I have ever bought for my scope hands down. I’m very pleased indeed. It makes shifting and setting up my scope a breeze. Thanks again. (S. K.)
“Last June I bought your Wheeley Bars for my 16″ Meade LightBridge. Needless to say, they have been fantastic. I use the scope at least ten times as much now as I did before putting it on the Wheels. Any time I want to observe, I just wheel it out of the garage and I’m ready within a couple of minutes! No re-collimating needed! Contrast that with moving the heavy scope out by hand in three parts, putting it together and re-collimating. This process had been a real deterrent to using the scope—not to mention disassembling it at night, cold and sleepy. I had considered spending $$$ on an observatory shelter but using the Wheeley Bars is so much better, and incredibly cost-effective. But you know all this! Your simple invention has re-opened the world of astronomy for me. And my neighbors—any time it’s going to be a good star night I send out an email and they come over. Thanks again.” (T. P. W. Jr.)
“I have received my order . Your service was very good. Much better than the servie I have had when purchasing other goods from the USA. My advice to my fellow Astronomical Society members will be, if you can buy it from JMI, go there first.” (I. G. F-W., Australia)
” Love being able to wheel my telescope in-and-out of the garage on a whim without having to wait for help to move it. I’m a 5′-2″, 53-year-old grandmother who couldn’t move the scope without help so this was just the ticket. Ladies, you’ll love it! Also, you just leave it on there while you star hop. The handle detaches so you don’t fall over it in the dark…. Thanks JMI!!!” (C. J.)
“I look forward to using my Wheeley Bars with my heavy telescope. It is sturdy and well made.” (S. B. H.)
“Well, I must say the product was more than I expected. Great work!! After years of the electronic stuff I have gone back to a Dob and Your wheelies make it so easy! Thanks!!” (J. W.)
“REALLY like my Wheeley…. C-102-HD is happy. So is my hernia. <G>” (P. H.)
“I received a set of your Wheeley Bars…. I put it together this morning with no trouble. This setup is the cat’s meow and the elephant’s PJs all rolled (pun intended) into one. Now I can keep the scope up and easily accessible on a whim as my binocs. How cool. Thank so much.” (M. M.)
“I have a Meade 10” LX200GPS on one set of Wheeley Bars and a CGE on another set and absolutely love them. It isn’t just the weight I can carry the mount in a couple of trips, no problem. The really huge advantage of the Wheeley Bars is that I can leave the mount/tripod/electrical and computer connections (USB hub, power strip) all attached permanently on the Wheeley Bar setup. I wheel out, attach one electrical connection (extension cord to the power strip), one computer connection (USB cable to the USB hub) and I am ready to go. A huge time saver setting up and taking down compared to having to make multiple connections each time. (D. S.)
“The materials used for the Wheeley Bars is excellent. They have exceeded my expectations. Good product.” (D. C. B.)
“The quality of the Wheeley Bars exceeded my expectations! I assembled them easily and with no problems. Good Job!” (S. S.)
“The Wheeley Bars are one of the best products ever introduced to the Amateur Astronomer in history… Your Wheeley Bars are exceptionally well designed for the price…” (R. J. G.)