Our most popular large format CCD camera. 16 megapixel sensor with 9 micron pixels, Adaptive Optics capable, Self Guided Filter Wheel Option.
Available on backorder
Get an alert when the product is in stock:
The SBIG STX Series represents the ultimate in astronomical imaging systems. The integrated design allows the user to select either Ethernet or high speed USB 2.0 connection to the control computer. The Model STX-16803 uses Kodak’s KAF-16803 CCD with 16 million pixels at 9 microns. The sensor measures almost 37mm square. The STX series has superior cooling to -50 degrees C below ambient with air only. Water-cooling is also possible. STX cameras have internal voltage regulation and may therefore be operated directly from any unregulated 12VDC power supply.
For guiding, a KAI-340 guide CCD is available in the optional Remote Guide Head, and in the optional STX Guider accessory for the FW7-STX filter wheel. The STX Guider increases the guider FOV with focal reduction optics. The StarChaser SC-3 is a new self-contained guiding option with built-in AO support.
The SBIG StarChaser SC-2 is a new option for integrated self-guiding and AO-X control. Attaching to the front of the FW8S-STXL filter wheel, it directly images and controls the AO completely independently of the main camera.
New Software Included!
Starting October 1, 2019 all new SBIG STX series cameras now include a license for our renowned MaxIm LT software, a $200 value, at no extra cost. Owners of older STX cameras can purchase a license at a discounted price of $99.
The STX uses an innovative pin fin heat sink. This design is the most efficient for dissipating heat per given volume, and while it is more expensive than typical parallel fin heat sinks commonly round elsewhere, it provides superior performance and minimizes size and weight at the same time. This is one of the reasons the STX camera weighs less than competing cameras with similar cooling performance. The new heat sink is an optimized design for this camera using a large custom pin fin heat sink mated directly to the hot side of the 2 stage TE cooler to achieve maximum heat dissipation with a single large fan. In less than 5 minutes the STX achieves a delta of -50C using air cooling only.
Water Circulation Ready
While the design is aimed at sufficient cooling without water assist, it is possible to use water instead of air or in addition to air for optimum cooling. Using water instead of air will not require the use of a fan.
Variable Speed Fan Control
If the user desires air cooling only, the fan speed is controllable through software. Variable speed control allows the user to “tune” to fan to eliminate any resonance with the user’s telescope thus suppressing harmonic vibrations.
User Rechargeable Desiccant
This feature allows the user the greatest flexibility in the field, and avoids having to return the camera to the factory in order to dry the CCD chamber.
From our first ST-7 camera, SBIG has incorporated an even illumination shutter for taking short exposure flat field frames. However the rotating disk design becomes rather large with ever increasing CCD sizes. The STX uses a linear shutter design that reduces overall size and weight, while maintaining even illumination on short exposures with large CCDs. This is something not found on any other camera with a CCD this large.
Flexible Self-Guiding Options
It is well known that the advantage of easier guiding through a separate guide scopes is often limited by differential deflection of the guide scope relative to the main optical axis due to mechanical flexure or shifting of the mirror in the main OTA.
We solved this problem by introducing the STX Guider, which attaches to the FW7-STX filter wheel and adds only 1.1″ of additional back focus distance. With the guider CCD integrated into the filter wheel, and focal reducing optics to increase the field of view, the optical design is optimized for guiding and everything is controlled through a single interface. The guider connects directly to the camera, and does not require additional power or control cables. The system can be operated by a single software package as one camera.
Note: due to the popularity of guiding in front of the filters via the STX Guider, an internal guide sensor option is no longer available.
The StarChaser SC-3 is a new self-contained guiding option with built-in AO support.
Optional AO-X Adaptive Optics
All STX models can operate with the AO-X Adaptive Optics accessory. The AO-X uses a tip-tilt window to quickly and precisely adjust the image position in response to autoguider feedback. With Adaptive Optics there is no backlash, stiction, or lag, and the movements are precise and accurate. This allows the AO-X to not only remove the effects of periodic error, drift, and wind gusts, but also reduce the effects of atmospheric seeing. The AO-X requires the use of an STX Guider, StarChaser SC-3, or an off-axis guide assembly with the Remote Guide Head.
For more information please see AO-X.
I2C AUX Port
The STX cameras have a convenient I2C AUX port, which controls all accessories including filter wheels and AO-8T Adaptive Optics accessories.
Tracking Relay LED indicators
This handy set of 4 LEDs will tell you at a glance if the camera is issuing corrections to the mount in +X, -X, +Y or -Y directions during an imaging session.
USB 2.0 and Ethernet
Both USB 2.0 and Ethernet are available on STX cameras. The user does not have to choose the interface at the time of purchase. The STX camera also directly powers and controls all optional accessories including filter wheel, STX Guider, and AO-X Adaptive Optics.
Full Frame Image Buffer
The STX series cameras has a full frame image buffer for storing image data during download. This eliminates any possibility of image artifacts caused by computer processing delays during image download.
All STX cameras include a deluxe carrying case, universal power supply, STX power extension cable, USB cable, guider cable and software.
Only logged in customers who have purchased this product may leave a review.
|A/D Converter||16 bits|
|Adaptive Optics Option||Y|
|Sensor Size||36.8 mm x 36.8 mm|
|Computer Interface||USB2 /Ethernet|
|Cooling Delta||~50 °C delta to a minimum -35°C operating temperature|
|Dark Current e/p/s at 0 C||0.8 e-/p/s typical|
|Filter Size||50mm Square|
|Filter Wheel Option||y|
|Full Frame Download||9 sec|
|Full Well Capacity||100,000 e- typical|
|Imaging / Pixel Array||4096 px x 4096 px|
|OAG Option||STX Guider or StarChaser|
|OS Compatibility||Windows 7, 8, 10 x86/x64, MacOS 10.14 “Mojave” x86 binaries, Ubuntu 18.04 LTS x64, Ubuntu Mate arm64|
|Pixel Digitization Rate||1.8 MHz|
|Pixel Size||9 μm|
|Power Cable||US, European|
|Read Noise||10 e- typical|
|Remote Guide Head||y|
|Self-Guiding In Front of Filters||Yes with STX Guider or StarChaser SC-3|
|Total Pixels||16.0 million pixels|
Product overview of STX and STXL cameras.
Installation, and operating instructions for STX-Series cameras. Note: for completeness the manual includes information for older STX cameras with internal guide sensors; these guide sensors have been discontinued.
Backfocus configuration table
The SBIG Universal Driver is distributed via SBIG Driver Checker 64 on Windows, and via an installer on Mac OSX. Keeping your drivers up to date is the best way to ensure your camera runs smoothly, so remember to update your drivers regularly.
CCDOPS is a free program that operates USB based SBIG cameras.
Software Development Kit
Software development kit for the Windows platform.