Soft Ground Foot, set of three (3) for Wheeley Bars with 1/2" Leveling Screws

SKU: TPWSGF12
Price
Regular price $65.00
Regular price Sale price $65.00
/
  • Secure payments
  • In stock, ready to ship
  • Backordered, shipping soon
Shipping calculated at checkout.
Soft Ground Feet · Set of 3 · 1/2″ Leveling Screws

3″ diameter steel "landing pads" that won't sink into grass, dirt, or gravel — swap out the rubber tips for confident leveling on soft ground.

The factory rubber tips on your Wheeley Bar's leveling screws work well on hard surfaces — concrete, driveway, garage floor — but they sink straight into lawn, dirt, or loose gravel. The JMI Soft Ground Feet are a drop-in upgrade: three steel feet with a 3″ diameter landing pad that thread onto your leveling screws in place of the rubber tips, distributing the load across a much larger footprint. The result is a firm, stable purchase that holds level all night, no matter the surface.

This is the 1/2″ version — sized for the Standard Medium Wheeley Bar and older HD Medium / HD Large models that use 1/2″ leveling screws. For the current HD lineup with 5/8″ leveling screws, see the 5/8″ Soft Ground Feet. Made in the USA by JMI, part of the CXB Astro family.

Confirm your leveling screw size before ordering. This set fits 1/2″ leveling screws only. Pull one leveling screw out of your bar and measure the thread diameter. 1/2″ is the older standard. 5/8″ is the current HD standard — for that, order the 5/8″ version instead.

Specifications

What's included
Set of three (3) Soft Ground Feet sized for 1/2″ leveling screws — one per leveling screw on your bar
Foot diameter
3″ — spreads the leveling-screw load across roughly 7 sq in (vs. ~0.4 sq in for the factory rubber tip)
Designed for
JMI Wheeley Bars with 1/2″ leveling screws — Standard Medium and older HD Medium / HD Large model years
Construction
Threaded steel feet with corrosion-resistant finish · replace the factory rubber tip + fender washer on each leveling screw
Installation
Unscrew the rubber tip from the bottom of each leveling screw · thread on the Soft Ground Foot · done. About 2 minutes total.
Best for
Lawn, dirt, gravel, mulch, sand, and any soft or uneven surface where the factory rubber tips would sink or wobble
NOT compatible with
Current HD Medium, HD Large, or HD Shorty (5/8″ screws) · Triangle Style · Sky Trekker series
Made in
USA by JMI · part of the CXB Astro family

Note: product photos shown are of the 5/8″ version. The 1/2″ set is functionally identical — same 3″ landing pad and same threaded steel construction — just sized for the smaller leveling-screw thread.

5/8″ Leveling Screws Instead?

If your Wheeley Bar uses 5/8″ leveling screws — current HD Medium, HD Large, or HD Shorty — order the 5/8″ Soft Ground Feet instead. Same set of three, same 3″ landing pad, sized for the larger heavy-duty thread.

Frequently Asked Questions

Why not just use the factory rubber tips on soft ground?

The factory rubber tips have a small contact patch (under half a square inch). On hard surfaces that's fine, but on grass, dirt, or gravel the tip sinks straight down into the soft ground under the weight of the mount and OTA. You lose your level, the rubber wears prematurely, and you may even tip the bar if the screws sink unevenly. The Soft Ground Feet spread the same load across about 7 square inches — the math does the work.

Do I need three, or can I just buy one?

You need three — one for each leveling screw on your Wheeley Bar. The set includes all three at one price ($65). Mixing factory rubber tips with Soft Ground Feet on the same bar will cause uneven leveling.

Which Wheeley Bars does this 1/2″ set fit?

The Standard Medium Wheeley Bar and older HD Medium / HD Large bars from before the 5/8″ upgrade. Not compatible with current HD Medium, HD Large, or HD Shorty (which use 5/8″ screws). For those, see the 5/8″ version.

How do I install them?

Unscrew the rubber tip and fender washer from the bottom of each leveling screw, then thread the Soft Ground Foot onto the same thread. No tools required — your fingers do the job. The whole swap takes about 2 minutes for all three.

Can I leave the Soft Ground Feet on for hard-surface observing too?

Yes — they work fine on concrete and pavement. They're slightly less compliant than the rubber tips on textured hard surfaces but won't damage anything. Many observers leave them on year-round since most observing happens somewhere soft.

Observe off-pavement?

Add the Soft Ground Feet for confident leveling on grass, gravel, or dirt. Shopping for a new bar? See the full lineup.

Shop accessories Shop all Wheeley Bars

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

You may also like
Recently viewed